IoT Hottub Temperature Controlled Power Switch

1. Køb en TH16
2. & en temperatursensor der passer til TH16 og dine behov
3. & en 3.3 volt USB til seriel adapter
4. & diverse ledninger
5. Læs dokumentation for ESPeasy
6. Jeg flasher med filen ESP_Easy_mega_20211105_normal_ESP8285_1M.bin
7. https://espeasy.readthedocs.io/en/latest/Reference/URLs.html?highlight=csv

Inspiration til denne side kommer fra https://www.redelijkheid.com/blog/2017/12/31/flashing-the-sonoff-th16-wireless-switch og https://tinkerman.cat/post/sonoff-th10-th16-sensors-displays-actuators

on sensorTemp#temperature do

        // Store current sensor temperature in a dummy variable
    TaskValueSet,varTemp,Dummy,[sensorTemp#temperature]

        // If temperature is above 37 OR the toggleSwitch state is 1
        // then set dummy Switch1 state to 1
    if [varTemp#lastValue]>=37 or [toggleSwitch#state]=1
       TaskValueSet,Switch1,state,1
    else
       TaskValueSet,Switch1,state,0
    endif

        // Set the relay and red LED state to the same state as dummy Switch1 state
    gpio,12,0[Switch1#state]
endon

https://hos.munkjensen.net/vildmarksbad.php