Revision as of 12:46, 16 November 2016

Scripts i (ab)use

Config NIC as DHCP Client
$IPType = "IPv4"
$adapter = Get-NetAdapter | ? {$_.Status -eq "up"}
$interface = $adapter | Get-NetIPInterface -AddressFamily $IPType

If ($interface.Dhcp -eq "Disabled") {
    # Remove existing gateway
    If (($interface | Get-NetIPConfiguration).Ipv4DefaultGateway) {
        $interface | Remove-NetRoute -Confirm:$false
    }

    # Enable DHCP
    $interface | Set-NetIPInterface -DHCP Enabled

    # Configure the  DNS Servers automatically
    $interface | Set-DnsClientServerAddress -ResetServerAddresses
}
Config NIC with static IP

$IP = "172.29.106.41"
$MaskBits = 27 # 24 = 255.255.255.0 | 27 = 255.255.255.224 $Gateway = "172.29.106.62" $Dns = "172.29.10.69" $IPType = "IPv4"

Retrieve the network adapter that you want to configure

$adapter = Get-NetAdapter | ? {$_.Status -eq "up"}

Remove any existing IP, gateway from our ipv4 adapter

If (($adapter | Get-NetIPConfiguration).IPv4Address.IPAddress) { $adapter | Remove-NetIPAddress -AddressFamily $IPType -Confirm:$false }
If (($adapter | Get-NetIPConfiguration).Ipv4DefaultGateway) { $adapter | Remove-NetRoute -AddressFamily $IPType -Confirm:$false }

Configure the IP address and default gateway

$adapter | New-NetIPAddress ` -AddressFamily $IPType ` -IPAddress $IP ` -PrefixLength $MaskBits ` -DefaultGateway $Gateway

Configure the DNS client server IP addresses

$adapter | Set-DnsClientServerAddress -ServerAddresses $DNS

@@ Line 1: / Line 1: @@
 = Scripts i (ab)use =
 <blockquote>
-<div class="toccolours mw-collapsible mw-collapsed">
+{| class="mw-collapsible mw-collapsed wikitable"
-==== Config NIC as DHCP Client ====
+! Config NIC as DHCP Client
-<div class="mw-collapsible-content">
+|-
+| <pre>$IPType = "IPv4"
-<pre>$IPType = "IPv4"
 $adapter = Get-NetAdapter | ? {$_.Status -eq "up"}
 $interface = $adapter | Get-NetIPInterface -AddressFamily $IPType
@@ Line 21: / Line 20: @@
      $interface | Set-DnsClientServerAddress -ResetServerAddresses
 }</pre>
-</div>
+|}
-</div>
+{| class="mw-collapsible mw-collapsed wikitable"
+! Config NIC with static IP
+|-
+| $IP = "172.29.106.41"
+$MaskBits = 27 # 24 = 255.255.255.0 | 27 = 255.255.255.224
+$Gateway = "172.29.106.62"
+$Dns = "172.29.10.69"
+$IPType = "IPv4"
+# Retrieve the network adapter that you want to configure
+$adapter = Get-NetAdapter | ? {$_.Status -eq "up"}
+# Remove any existing IP, gateway from our ipv4 adapter
+If (($adapter | Get-NetIPConfiguration).IPv4Address.IPAddress) {
+    $adapter | Remove-NetIPAddress -AddressFamily $IPType -Confirm:$false
+}
+If (($adapter | Get-NetIPConfiguration).Ipv4DefaultGateway) {
+    $adapter | Remove-NetRoute -AddressFamily $IPType -Confirm:$false
+}
+# Configure the IP address and default gateway
+$adapter | New-NetIPAddress `
+    -AddressFamily $IPType `
+    -IPAddress $IP `
+    -PrefixLength $MaskBits `
+    -DefaultGateway $Gateway
+# Configure the DNS client server IP addresses
+$adapter | Set-DnsClientServerAddress -ServerAddresses $DNS
+|}
 </blockquote>
 [[Category:Windows]]