Drying out filament

From munkjensen.net/wiki
Revision as of 21:27, 15 November 2021 by Admin (talk | contribs) (Created page with "=== Temperatures and times needed to dry various filaments === * '''PLA''' - 45C (113F) at least 4 hours * '''ABS''' - 60C (140F) at least 2 hours * '''PETG''' - 65C (149F) a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Temperatures and times needed to dry various filaments

  • PLA - 45C (113F) at least 4 hours
  • ABS - 60C (140F) at least 2 hours
  • PETG - 65C (149F) at least 2 hours
  • Nylon - 70C (158F) at least 12 hours
  • Dessicant (Silica Gel) - 65C (149F) at least 3 hours

Note that though calcium chloride can be dried out it requires a more complex method that just sticking it in an dehydrator oven and because of that it is not recomended to do at home.

Retrieved from "https://munkjensen.net/wiki/index.php?title=Drying_out_filament&oldid=1716"