Secure you Debian Server
This guide contain the steps i always do on first time login after installing Debian on a blank server.
- You need root access for the first steps, so gain root access as secure as you possibly can.
Update Debian
- This is a good idea to do before anything else.
- Using the -y switch on apt-get will assume "yes" to all questions from apt-get.
- Sometimes ca-certificates needs an upgrade, and to make sure you know this is done you will need to press q to continue the apt-get -y upgrade
Here is how:
root@pulspc:~# apt-get -y update
Ign http://ftp.debian.org jessie InRelease
Get:1 http://ftp.debian.org jessie-updates InRelease [145 kB]
Get:2 http://ftp.debian.org jessie Release.gpg [2,373 B]
........ Lots of lines removed for convienience !!
Get:15 http://ftp.debian.org jessie-updates/main amd64 2016-11-30-2028.41.pdiff [530 B]
Get:16 http://security.debian.org jessie/updates/main Translation-en [183 kB]
Fetched 19.5 MB in 7s (2,674 kB/s)
Reading package lists... Doneroot@pulspc:~#apt-get -y upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
........ Lots of lines removed for convienience !!
Setting up python-pil:amd64 (2.6.1-2+deb8u3) ...
Processing triggers for libc-bin (2.19-18+deb8u7) ...
Processing triggers for ca-certificates (20141019+deb8u2) ...
Updating certificates in /etc/ssl/certs... 10 added, 10 removed; done.
Running hooks in /etc/ca-certificates/update.d....done.
root@pulspc:~#Configure Automatic Security Updates
Here you can see my configuration files
This is my version of the file /etc/apt/apt.conf.d/50unattended-upgrades
// Unattended-Upgrade::Origins-Pattern controls which packages are
// upgraded.
//
// Lines below have the format format is "keyword=value,...". A
// package will be upgraded only if the values in its metadata match
// all the supplied keywords in a line. (In other words, omitted
// keywords are wild cards.) The keywords originate from the Release
// file, but several aliases are accepted. The accepted keywords are:
// a,archive,suite (eg, "stable")
// c,component (eg, "main", "crontrib", "non-free")
// l,label (eg, "Debian", "Debian-Security")
// o,origin (eg, "Debian", "Unofficial Multimedia Packages")
// n,codename (eg, "jessie", "jessie-updates")
// site (eg, "http.debian.net")
// The available values on the system are printed by the command
// "apt-cache policy", and can be debugged by running
// "unattended-upgrades -d" and looking at the log file.
//
// Within lines unattended-upgrades allows 2 macros whose values are
// derived from /etc/debian_version:
// ${distro_id} Installed origin.
// ${distro_codename} Installed codename (eg, "jessie")
Unattended-Upgrade::Origins-Pattern {
// Codename based matching:
// This will follow the migration of a release through different
// archives (e.g. from testing to stable and later oldstable).
"o=Debian,n=jessie";
"o=Debian,n=jessie-updates";
"o=Debian,n=jessie-proposed-updates";
"o=Debian,n=jessie,l=Debian-Security";
// Archive or Suite based matching:
// Note that this will silently match a different release after
// migration to the specified archive (e.g. testing becomes the
// new stable).
// "o=Debian,a=stable";
// "o=Debian,a=stable-updates";
// "o=Debian,a=proposed-updates";
"origin=Debian,codename=${distro_codename},label=Debian-Security";
};
// List of packages to not update (regexp are supported)
Unattended-Upgrade::Package-Blacklist {
// "vim";
// "libc6";
// "libc6-dev";
// "libc6-i686";
};
// This option allows you to control if on a unclean dpkg exit
// unattended-upgrades will automatically run
// dpkg --force-confold --configure -a
// The default is true, to ensure updates keep getting installed
//Unattended-Upgrade::AutoFixInterruptedDpkg "false";
// Split the upgrade into the smallest possible chunks so that
// they can be interrupted with SIGUSR1. This makes the upgrade
// a bit slower but it has the benefit that shutdown while a upgrade
// is running is possible (with a small delay)
//Unattended-Upgrade::MinimalSteps "true";
// Install all unattended-upgrades when the machine is shuting down
// instead of doing it in the background while the machine is running
// This will (obviously) make shutdown slower
//Unattended-Upgrade::InstallOnShutdown "true";
// Send email to this address for problems or packages upgrades
// If empty or unset then no email is sent, make sure that you
// have a working mail setup on your system. A package that provides
// 'mailx' must be installed. E.g. "[email protected]"
Unattended-Upgrade::Mail "root";
// Set this value to "true" to get emails only on errors. Default
// is to always send a mail if Unattended-Upgrade::Mail is set
//Unattended-Upgrade::MailOnlyOnError "true";
// Do automatic removal of new unused dependencies after the upgrade
// (equivalent to apt-get autoremove)
Unattended-Upgrade::Remove-Unused-Dependencies "true";
// Automatically reboot *WITHOUT CONFIRMATION* if
// the file /var/run/reboot-required is found after the upgrade
Unattended-Upgrade::Automatic-Reboot "false";
// If automatic reboot is enabled and needed, reboot at the specific
// time instead of immediately
// Default: "now"
Unattended-Upgrade::Automatic-Reboot-Time "02:00";
// Use apt bandwidth limit feature, this example limits the download
// speed to 70kb/sec
//Acquire::http::Dl-Limit "70";This is my version of the file /etc/apt/apt.conf.d/02periodic
// Control parameters for cron jobs by /etc/cron.daily/apt //
// Enable the update/upgrade script (0=disable)
APT::Periodic::Enable "1";
// Do "apt-get update" automatically every n-days (0=disable)
APT::Periodic::Update-Package-Lists "1";
// Do "apt-get upgrade --download-only" every n-days (0=disable)
APT::Periodic::Download-Upgradeable-Packages "1";
// Run the "unattended-upgrade" security upgrade script
// every n-days (0=disabled)
// Requires the package "unattended-upgrades" and will write
// a log in /var/log/unattended-upgrades
APT::Periodic::Unattended-Upgrade "1";
// Do "apt-get autoclean" every n-days (0=disable)
APT::Periodic::AutocleanInterval "21";
// Send report mail to root
// 0: no report (or null string)
// 1: progress report (actually any string)
// 2: + command outputs (remove -qq, remove 2>/dev/null, add -d)
// 3: + trace on
APT::Periodic::Verbose "2";This is my version of the file /etc/apt/listchanges.conf
[apt]
frontend=pager
email_address=root
confirm=0
save_seen=/var/lib/apt/listchanges.db
which=bothCreate and use a non-root user account
Make SSH Access more secure
Install authentication key-pair
Harden the SSH Daemon
Brute force SSH Login Protection
Inspiration was found at http://www.linode.com/docs/security/securing-your-server/