PowerShell stuph...
Scripts i (ab)use
Config NIC as DHCP Client --> $IPType = "IPv4" $adapter = Get-NetAdapter | ? {$_.Status -eq "up"} $interface = $adapter | Get-NetIPInterface -AddressFamily $IPType If ($interface.Dhcp -eq "Disabled") { # Remove existing gateway If (($interface | Get-NetIPConfiguration).Ipv4DefaultGateway) { $interface | Remove-NetRoute -Confirm:$false } # Enable DHCP $interface | Set-NetIPInterface -DHCP Enabled # Configure the DNS Servers automatically $interface | Set-DnsClientServerAddress -ResetServerAddresses }
Config NIC with static IP --> $IP = "172.29.106.41" $MaskBits = 27 # 24 = 255.255.255.0 | 27 = 255.255.255.224 $Gateway = "172.29.106.62" $Dns = "172.29.10.69" $IPType = "IPv4"
- Retrieve the network adapter that you want to configure
$adapter = Get-NetAdapter | ? {$_.Status -eq "up"}
- Remove any existing IP, gateway from our ipv4 adapter
If (($adapter | Get-NetIPConfiguration).IPv4Address.IPAddress) { $adapter | Remove-NetIPAddress -AddressFamily $IPType -Confirm:$false }
If (($adapter | Get-NetIPConfiguration).Ipv4DefaultGateway) { $adapter | Remove-NetRoute -AddressFamily $IPType -Confirm:$false }
- Configure the IP address and default gateway
$adapter | New-NetIPAddress ` -AddressFamily $IPType ` -IPAddress $IP ` -PrefixLength $MaskBits ` -DefaultGateway $Gateway
- Configure the DNS client server IP addresses
$adapter | Set-DnsClientServerAddress -ServerAddresses $DNS