Secure you Debian Server

From munkjensen.net/wiki

This guide contain the steps i always do on first time login after installing Debian on a blank server.

  • You need root access for the first steps, so gain root access as secure as you possibly can.


Update Debian

  • This is a good idea to do before anything else.

- Using the -y switch on apt-get will assume "yes" to all questions from apt-get.

- Sometimes ca-certificates needs an upgrade, and to make sure you know this is done you will need to press q to continue the apt-get -y upgrade

Here is how:

root@pulspc:~# apt-get -y update
Ign http://ftp.debian.org jessie InRelease
Get:1 http://ftp.debian.org jessie-updates InRelease [145 kB]
Get:2 http://ftp.debian.org jessie Release.gpg [2,373 B]

........ Lots of lines removed for convienience !!

Get:15 http://ftp.debian.org jessie-updates/main amd64 2016-11-30-2028.41.pdiff [530 B]
Get:16 http://security.debian.org jessie/updates/main Translation-en [183 kB]
Fetched 19.5 MB in 7s (2,674 kB/s)
Reading package lists... Done
root@pulspc:~#apt-get -y upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:

........ Lots of lines removed for convienience !!

Setting up python-pil:amd64 (2.6.1-2+deb8u3) ...
Processing triggers for libc-bin (2.19-18+deb8u7) ...
Processing triggers for ca-certificates (20141019+deb8u2) ...
Updating certificates in /etc/ssl/certs... 10 added, 10 removed; done.
Running hooks in /etc/ca-certificates/update.d....done.
root@pulspc:~#

Configure Automatic Security Updates

Here you can see my configuration files

This is my version of the file /etc/apt/apt.conf.d/50unattended-upgrades

// Unattended-Upgrade::Origins-Pattern controls which packages are
// upgraded.
//
// Lines below have the format format is "keyword=value,...".  A
// package will be upgraded only if the values in its metadata match
// all the supplied keywords in a line.  (In other words, omitted
// keywords are wild cards.) The keywords originate from the Release
// file, but several aliases are accepted.  The accepted keywords are:
//   a,archive,suite (eg, "stable")
//   c,component     (eg, "main", "crontrib", "non-free")
//   l,label         (eg, "Debian", "Debian-Security")
//   o,origin        (eg, "Debian", "Unofficial Multimedia Packages")
//   n,codename      (eg, "jessie", "jessie-updates")
//     site          (eg, "http.debian.net")
// The available values on the system are printed by the command
// "apt-cache policy", and can be debugged by running
// "unattended-upgrades -d" and looking at the log file.
//
// Within lines unattended-upgrades allows 2 macros whose values are
// derived from /etc/debian_version:
//   ${distro_id}            Installed origin.
//   ${distro_codename}      Installed codename (eg, "jessie")
Unattended-Upgrade::Origins-Pattern {
        // Codename based matching:
        // This will follow the migration of a release through different
        // archives (e.g. from testing to stable and later oldstable).
      "o=Debian,n=jessie";
      "o=Debian,n=jessie-updates";
      "o=Debian,n=jessie-proposed-updates";
      "o=Debian,n=jessie,l=Debian-Security";

        // Archive or Suite based matching:
        // Note that this will silently match a different release after
        // migration to the specified archive (e.g. testing becomes the
        // new stable).
//      "o=Debian,a=stable";
//      "o=Debian,a=stable-updates";
//      "o=Debian,a=proposed-updates";
        "origin=Debian,codename=${distro_codename},label=Debian-Security";
};

// List of packages to not update (regexp are supported)
Unattended-Upgrade::Package-Blacklist {
//      "vim";
//      "libc6";
//      "libc6-dev";
//      "libc6-i686";
};

// This option allows you to control if on a unclean dpkg exit
// unattended-upgrades will automatically run
//   dpkg --force-confold --configure -a
// The default is true, to ensure updates keep getting installed
//Unattended-Upgrade::AutoFixInterruptedDpkg "false";

// Split the upgrade into the smallest possible chunks so that
// they can be interrupted with SIGUSR1. This makes the upgrade
// a bit slower but it has the benefit that shutdown while a upgrade
// is running is possible (with a small delay)
//Unattended-Upgrade::MinimalSteps "true";

// Install all unattended-upgrades when the machine is shuting down
// instead of doing it in the background while the machine is running
// This will (obviously) make shutdown slower
//Unattended-Upgrade::InstallOnShutdown "true";

// Send email to this address for problems or packages upgrades
// If empty or unset then no email is sent, make sure that you
// have a working mail setup on your system. A package that provides
// 'mailx' must be installed. E.g. "[email protected]"
Unattended-Upgrade::Mail "root";

// Set this value to "true" to get emails only on errors. Default
// is to always send a mail if Unattended-Upgrade::Mail is set
//Unattended-Upgrade::MailOnlyOnError "true";

// Do automatic removal of new unused dependencies after the upgrade
// (equivalent to apt-get autoremove)
Unattended-Upgrade::Remove-Unused-Dependencies "true";

// Automatically reboot *WITHOUT CONFIRMATION* if
//  the file /var/run/reboot-required is found after the upgrade
Unattended-Upgrade::Automatic-Reboot "false";

// If automatic reboot is enabled and needed, reboot at the specific
// time instead of immediately
//  Default: "now"
Unattended-Upgrade::Automatic-Reboot-Time "02:00";

// Use apt bandwidth limit feature, this example limits the download
// speed to 70kb/sec
//Acquire::http::Dl-Limit "70";

This is my version of the file /etc/apt/apt.conf.d/02periodic

// Control parameters for cron jobs by /etc/cron.daily/apt //

// Enable the update/upgrade script (0=disable)
APT::Periodic::Enable "1";

// Do "apt-get update" automatically every n-days (0=disable)
APT::Periodic::Update-Package-Lists "1";

// Do "apt-get upgrade --download-only" every n-days (0=disable)
APT::Periodic::Download-Upgradeable-Packages "1";

// Run the "unattended-upgrade" security upgrade script
// every n-days (0=disabled)
// Requires the package "unattended-upgrades" and will write
// a log in /var/log/unattended-upgrades
APT::Periodic::Unattended-Upgrade "1";

// Do "apt-get autoclean" every n-days (0=disable)
APT::Periodic::AutocleanInterval "21";

// Send report mail to root
//     0:  no report             (or null string)
//     1:  progress report       (actually any string)
//     2:  + command outputs     (remove -qq, remove 2>/dev/null, add -d)
//     3:  + trace on
APT::Periodic::Verbose "2";

This is my version of the file /etc/apt/listchanges.conf

[apt]
frontend=pager
email_address=root
confirm=0
save_seen=/var/lib/apt/listchanges.db
which=both

Create and use a non-root user account

  • It is not a good idea to use the root account all the time. It is so powerful that even the smallest mistake can have devastating results if executed as root. Logging in as root directly is also considered bad practice so we will fix that now.

The sudo feature is not installed by default on Debian so we will do this first, since we rely heavily on this command when logging in as a "normal" user that needs to do stuff that requires root privileges.

root@pulspc:~# apt-get install sudo
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
  sudo
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 855 kB of archives.
After this operation, 2,390 kB of additional disk space will be used.

....................

Setting up sudo (1.8.10p3-1+deb8u3) ...
Processing triggers for systemd (215-17+deb8u6) ...
root@pulspc:~#

Make SSH Access more secure

Install authentication key-pair

Harden the SSH Daemon

Brute force SSH Login Protection


Inspiration was found at http://www.linode.com/docs/security/securing-your-server/